Machine Description
Machine Model : CPU20J-S
Excellent Features:
Ø ZCE casting polyurethane machine is a reliable processing machine dedicated to efficiently manage your daily production. Custom-tailored capabilities.
The mixing unit:
Depending to the parameters of total pouring volume and mixing ratio required by formulation, A, B and C choose high-precision metering pumps with high-temperature resistance and low speed whose metering accuracy error does not exceed (+0.5%). When the temperature, viscosity or pressure of the raw materials fluctuates, the measurement and proportion are always accurate and stable.
In order to measure the displacement of pump accurately, the machine uses synchronous motor and speed reducer to drive the actuator and change its speed to adjust.
The mix head:
The machine is equipped with precision gear pumps that are accurately controlled. This results in consistent pump output and ratio accuracy.
(1) The mixing device adopts the anti-dumping device with an exquisite structure and convenient replacement so that the mixing shaft can run at high speed without anticipating and channeling.
(2) The mixing head is made of straight-tooth mixing head stainless steel, which is light and durable, ensuring uniform mixing and no bubbles.
(3) The motor of the mixing head rotates at high speed in the mixing chamber by increasing the speed of the mixing head by frequency conversion. When the raw liquid is changed from a needle valve to pouring state, it enters the mixing chamber through the throttle hole and is injected onto the surface of the rotating rubber roller. When cleaning, the solvent enters the mixing chamber to clean the mixing head to ensure the next operation; static pressure is set on the feeding pipe, which can be fine-tuned with a viscosity less than 50 CPS to ensure the system pressure is stable, and the proportion of materials in the mixing process is stable as well.
(4) The motor 2.2kw 2P rotates at 3000-5000r.p.m and extends 600m m-1000m m (according to the size of the roll to be determined) to 1100m m-1400m m off the ground.
Technical parameters
1. Output : 250~500g/min
2. Three-phase AC 380V + zero line + (ground) frequency: 50HZ total power 35KW wire 10 square line
3. Air source: The outer diameter of the inlet pipe is 8mm and the pressure is 0.6~0.8MPa.
4. Three components mixing ratio: A: B:C = 100: 205~27:5 ~ 20
Raw Chemical Components
Output : g/min
FAQ:
Q : Are you factory or trade company ?
A: Yes. We are professional polyurethane equipment factory . Started in 1998.
Q: What’s the delivery time ?
A: Normally the delivery time 20-60 days .
Q: Do you have the raw material test service?
A: Yes, we can assist test report for product
Q: What’s your tem of the delivery?
A: Our ordinary delivery term is FOB ningbo. We also accept EXW, CFR, CIF.
Q: What’s is your shipping service?
A: We can provide services for vessel booking, goods consolidation, customs declaration, shipping documents preparation and delivery bulk at the shipping port.
Q: When can I get the price?
A: Usually we quote within 8 hours after we get your inquiry.
Q: What’s your MOQ?
A: OEM/ODM MOQ I set
Q: What is your term of payment?
A: 30% down payment before producing and 70% balance payment before shipping.
Q: Which payment form you can accept?
A: T/T, Western Union, PayPal etc.
Hot Tags: four components polyurethane seals making machine, China, suppliers, manufacturers, factory, wholesale, buy, cheap, bulk, customized, low price, in stock, free sample, made in China