Three-component Elastomer Casting Machine CPU30J-D1

The TDI/MDI/NDI System Machine is used for making casting type polyurethane Elastomer products.
Components: TDI, MOCA with any kind of additive, pigment, and catalyst
Heating Power: Electric Heating

Product Details

Product parameters

Product Category: Three-component elastomer casting machine

The TDI/MDI/NDI System Machine is used for making casting type polyurethane Elastomer products.

Components: TDI, MOCA with any kind of additive, pigment, and catalyst
Heating Power: Electric Heating


Ⅰ.Product Models: CPU30J

The TDI/MDI/NDI System Machine is fit for making casting type polyurethane Elastomer products.


Ⅱ.Key Features:

1. The raw material tank adopts the hot air circulation of electric heating, which makes heating faster, efficient, energy saving, safe and environmental protection.

2. High-temperature resistant low-speed high-precision metering pump; accurate matching, flexible adjustment, and measurement accuracy error: ≤±0.5%.
3. Independent PLC control system in the branch temperature controller of each group, with special electric heating system, oven, piping and values which can be adjusted separately; multi-point temperature control device is used to ensure that the raw material to maintain a constant temperature throughout the cycle process; temperature error: ≤2℃.
4. The mixing device is reasonably designed
5. The color paste directly goes into the mixing device; different colors can be switched at any time; the mixing is uniform and the metering is accurate.
6. Imported Siemens PLC controller to monitor the entire control system; it will automatically make the judgment of abnormity, diagnosis and alarm, abnormal factors display, PLC module control, casting, automatic cleaning, and air blast; stable performance and strong operability.
7. Vacuum degassing system.
8.Direct injection of additives into the mixing chamber.
9. Mechanical seal.
10. The electric heating and a multipoint temperature control device.
11.Excellent dynamic tooth type design
12.Mechanical seal structure avoids reflux problem.
13.Accurate measurement, homogeneous mix and no bubbles.

14.The machine can be custom-tailored in order to satisfy any specific request

15.The number of components and pigments tailored according to the buyer's requirements.

16.Thermo-regulating system is fully verifiable and adjustable.

17.Dynamic mixing head mounted on a supporting arm or a pouring trolley.
18.Washing system to flush the mixer and mixing chamber automatically after pouring.

19.TDI machines can be equipped with either mass flow meters or a manual calibration system

20.Up to 33 formulations.


III.Working conditions:

Component Name

Mixing ratio

Temperature(℃)

Viscosity (CPS)

A (TDI prepolymer)

100

60-100℃

﹤2000

B (MOCA etc.)

6-20

80-125℃

﹤100

C Color paste

0.5-3

Room temperature

50-2000


IⅤ.Main parameters:

Model

CPU30J-M1

CPU30J-M2

CPU30J-M3

CPU30J-M4

CPU30J-M5

CPU30J-X

CPU30J-X

Total Flow Rate (g/min)

250-2500

1000-5000

3000-10000

5000-15000

10000-30000

20000-40000

30000-50000

A Tank capacity (L)

160

160

250

250

400

400

400

B Tank capacity (L)

160

160

250

250

250

250

250

C Tank capacity (L)

30

30

80

80

80

80

80

Pouring head stirring speed(r/min)

3000-5000

3000-5000

3000-5000

3000-5000

3000-5000

3000-5000

3000-5000

Height from the ground(mm)

1200

1200

1200

1300

1300

1300

1300

Total power(kw)

35

38

40

40

46

48

50


This product Keywords: TDI/MDI/NDI System Machine Polyurethane machine , Polyurethane pouring machine , pu injection machine , polyurethane dispenser machine , PU dispenser machine , Pu roller making machine, Polyurethane wheel and castor making machine ,Polyurethane elastomer machine , MDI/TDI/NDI Polyurethane machine , Polyurethane injection machine , Polyurethane two components pouring machine ,Polyurethane three components pouring machine . Polyurethane casting machine . Polyurethane wheel machine,Polyurethane roller machine


Inquiry