How to maintain the polyurethane foaming machine on a daily basis?

- Aug 13, 2020-

How to maintain the polyurethane foaming machine on a daily basis?

With the rapid development of the foaming machine industry, the polyurethane high-pressure foaming machine has begun to receive widespread attention. In normal use, the most important thing for the polyurethane high-pressure foaming machine is the daily equipment maintenance, so the daily maintenance of the polyurethane high-pressure foaming machine How to proceed?


Yabu Machinery teaches you how to do the daily maintenance of the polyurethane foaming machine?


1. Polyurethane high-pressure foaming machine equipment should be kept thoroughly clean, leaving no residue, and the surroundings should always be clean;


2. Before production, pay attention to check the condition of each part and the sealing ring, and deal with it in time if there is any problem;


3. During production, observe the operation of the equipment at any time. If there is abnormal noise or red light, stop the machine for inspection;


4. After the polyurethane high-pressure foaming machine is produced, the gun head should be put into the dipping gun barrel, and the liquid level of the dipping gun should not be lower than the inclined hole position of the mixer;


5. After production, pay attention to cleaning the screw plug and filter screen in front of the mixer.


6. Pay attention to the daily maintenance of the motor, pay attention to the way of cleaning, do not damage the protective layer, and the head of the machine cannot be watered.